Ranger 225 GXT

Got It Covered!TM
Enclosed-Case Welder
At Your Service – Everyday!

Processes
Stick, TIG, MIG, Flux-Cored, Gouging

Totally Enclosed Case
– Showroom Appearance.
– Engine is fully protected – no openings without doors.
– Three engine doors for service access.
– Lower noise than partially enclosed and unenclosed welders of comparable output. 76.4 dBA sound level at 23 ft. / 7 m (100.7 dB sound power Lwa) – you can hear the difference!

• Versatile AC/DC Welding
– Smooth AC/DC welding output for a broad range of stick electrodes, such as Lincoln Excalibur® 7018 (AWS E7018) and Fleetweld® 5P+ (AWS E6010).
– Also weld MIG, Flux-Cored, and TIG (with additional optional equipment).

• 10,500 Watts Peak Single-Phase AC Generator Power
– 10,500 watts is the most peak power in this product class.
– Use peak power for motor starting.
– 9,000 watts continuous power for high capacity needs such as a backup generator, powering a Pro-Cut® plasma cutter, or an Invertec® inverter welder.
– Also for lights, a grinder or other power tools.

• 23 HP Kohler® Gasoline Engine
– Plenty of Engine Horsepower!
– 2-cylinder, 4-cycle OHV (overhead valve) air-cooled.
– Oil drain extension tube provided for easy oil changes. Convenient storage holder near engine.
– 12 Gallon tank for extended hours of operation.
– Only 1.3 gallons/hour at 210 A DC 25V rated output.
– Electric fuel gauge located on control panel. Easily check fuel level during operation and refueling. Helps you avoid running low on fuel during critical jobs.

• Rugged Reliability
– Rangers® have been subjected to an extensive testing program to ensure reliable operation in a wide variety of environmental conditions.
– All rated outputs at 100% duty cycle 104°F (40°C).
– Three-year Lincoln warranty (parts and labor) on welder. (Engine is warranted separately by the manufacturer.)

Physical specifications

Weight:567 lbs. (257 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 10735

RECOMMENDED GENERAL OPTIONS
Power Plug Kit (20 amp) K802N
Power Plug Kit (15 amp) K802R
Full-KVA Power Plug T12153-9
GFCI Receptacle Kit (20 amp) 2 kits required K1690-1
Spark Arrester Kit K1898-1
Canvas Cover K886-2
Undercarriages
All Terrain Undercarriage K1737-1
Factory Undercarriage K1770-1
-Welding Gas Cylinder/LPG Tank Holder (for K1770-1) K1745-1
-Roll Cage (attaches to K1737-1 and K1770-1 and K2635-1 trailer) K1788-1
Small Two Wheel Welder Trailer & Duo Hitch™ K2635-1
-Fender and Light Kit K2639-1
-Cable Rack K2640-1

RECOMMENDED STICK OPTIONS
Accessory Kit, 400 amp K704
Accessory Kit, 150 amp K875
RECOMMENDED TIG OPTIONS
Pro-Torch® TIG Torch PTA-26V K1783-9
Magnum® Parts Kit KP509
TIG Module K930-2
- Control Cable (required) K936-4
- Control Cable Extension K937-45
- Arc Start Switch (required) K814
- Contactor Kit (required) K938-1
- Docking Kit K939-1
Precision TIG® 225 Ready-Pak® (for AC TIG Welding) K2535-1
Invertec® V205-T AC/DC One-Pak® Package (for AC TIG welding) K2350-2
- Full KVA Adapter Kit (required for K2535-1 and K2350-1) K1816-1
RECOMMENDED WIRE FEEDER OPTIONS
LN™-25 PRO Wire Feeder K2613-1
Magnum® 350 Innershield® Gun K126-2
Drive Roll and Wire Guide Kit .068”-.072” (for LN™-25 PRO) KP1697-068
Magnum® 300 MIG Gun (for LN™-25 PRO) (includes Connector Kit) K1802-1
Drive Roll and Wire Guide Kit (for LN™-25 PRO) KP1696-1
Power MIG® 180C K2473-1
- Full-KVA Adapter Kit (required) K1816-1
- Magnum® 100SG Spool Gun K2532-1
RECOMMENDED PLASMA CUTTING OPTIONS
Pro-Cut® 55 K1580-1
- Full-KVA Adapter Kit (required) K1816-1

Welding Specifications

Engine Specifications